Home uses for pressure washers
Cleaning large surfaces such as a deck, driveway or even the exterior of a home could require a lot of time to complete with a hand. A portable pressure washer with water tank are a tool that combines the natural cleaning power of water with powerful pressure to give an effective wash in a fraction of the time.
Like any tool, to maximize the use the pressure washer you must understand how it works. Here is a manual that can teach you the fundamentals of using a pressure cleaner.
How a pressure washer works
How a pressure washer gets its pressure
A pressure washer makes use of the water from a normal outdoor garden hose. The hose is connected to the machine. A high-speed pump within the unit elevates the pressure of the water until it can be used to create a highly aggressive stream. The strength of the spray is controlled by the nozzle.
What are the different pressure washer nozzles?
The nozzles are what provide the proper cleaning power. It is possible to find five basic nozzles which are distinguished by how focused on the spray.
The red nozzle produces a thin, powerful jet of water that is perfect for the most challenging stains.
Yellow nozzles are a step down in strength and is ideal to remove mildew and paint.
The green nozzle is a common cleaning nozzle that is designed for general.
The white nozzle is the largest spray, making it ideal for cleaning and washing.
It is the sole nozzle that works with soap. In addition, you can buy a turbo spray nozzle or an multipurpose nozzle or a surface cleaning attachment, which is ideal to clean patios, decks and more.
While the best directions to use your pressure washer must be included with the purchase, this general overview will give you an understanding of the entire procedure.
- Clear the area you’ll be cleaning to make sure all fragile items have been removed. Clean up dirt and debris and cover anything that can’t be moved with the use of a sheet of tarp.
- Survey the area so you’re aware of windows, outlets and vents.
- Choose and connect the appropriate nozzle to the task.
- The garden hose should be connected to your pressure washer and give the machine a thorough inspection to make sure that everything is fastened tightly and this machine is completely safe to use.
- Wear a pair of safety glasses to stop debris from getting back into your eyes.
- Switch on the water supply via the outdoor water spigot.
- Press the trigger on the wand to let out any air pressure that might be present in the line.
- Follow the specific instructions of your machine to start your machine.
- Before you use to spray, check the strength that the spray is able to emit in a protected area and adjust as needed.
- Now is the time to begin cleaning.
- After turning off your pressure washer and turning off water flow, be sure you squeeze the trigger to let any water pressure to escape before disconnecting the hose as well as other parts.
Pressure washing tips
- Pressure washers use lots of water. Make sure you have sufficient drainage around the area where you’re working or things will quickly get messy.
- The most important aspect of cleaning safely is to choose the right nozzle to do the job. Make sure you choose wisely, since an improper nozzle can cause damage to wood and siding.
- Avoid spraying on painted surfaces, windows or outdoor fixtures. Also, avoid spraying electrical lines.
- The closer you are to the surface, the more thoroughly the pressure washer will clean. Always begin cleaning from an area that is a few feet away. If you need greater intensity, gradually bring the sprayer closer to the surface that you’re cleaning.
- Don’t apply pressure washers when you’re working on a ladder.
- When cleaning vertically, you should move between top and bottom, in a side-toside pattern.
- Small areas of work with clearly stated objectives.
- If you are tired, stop for a moment.